Mochini o itirisang oa lebelo le phahameng oa ho etsa li-grid roll tsa mantlha le tsa cross t Setšoantšo se hlahisitsoeng

Mochini o ikatisang oa lebelo le phahameng haholo oa ho etsa mochini oa mantlha le oa cross t grid roll roll

1.1, mohala oa tlhahiso ea T-Bar o ka hlahlojoa ke PLC. Haeba mohala oa tlhahiso ea T-bar o na le liphoso, PLC e tla fumana liphoso. Ho bonolo ho hlokomela basebetsi.

1.2, Lebelo la T-Bar Production le ka 0-80M/min.

１.3, Litlhaloso tse fapaneng tsa ho etsa li-roller (6) li ka nkeloa sebaka ka metsotso e 30, litlhaloso tsa 24X30H li ka hlahisoa haeba u eketsa lihlopha tse etsang li-roller (6)

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Tlhaloso ea Sehlahisoa

hydraulic de-coiler e le 'ngoe (coil ea tšepe ea pente)

Boima ba ho kenya 100Kgs*3=300kg

Tlhaloso ea coil: OD 2,000 mm.

ID 300/500mm.

Bophara ba tšepe ea pente: 50 mm.

Ka ho atolosa moea ho tiisa khoele.

Video

De-coiler e nang le enjene e habeli (khoele ea tšepe e entsoeng ka masenke)

Bokhoni ba ho kenya :3000Kgs*2

Tlhaloso ea coil: OD 1,500 mm.

ID 508 limilimithara.

bophara: 150 limilimithara.

Ka ho bilika ka letsoho ho tiisa khoele.

E khannoang ke enjene.

Enjene e tsamaisoang: 1.5kw

Ho theha mochini oa mochini oa TECO motor le redcuer

● Matla a motlakase ke 15KW, lebitso ke TECO

● Reducer brand ke ea malapeng

● Thepa ea motheo ea mochine ke Q345-B tšepe ka phekolo ea mocheso o feletseng ho felisa matla a ka hare bakeng sa bophelo bo bolelele ba mochine

● Tafole e sebetsang ea mochine e sebelisa ts'ebetso e kholo ea CNC bakeng sa boemo bo phahameng bo nepahetseng, mamello e bataletseng ka har'a 0.05mm, sebaka se ka hare ho 0.02mm ho lihlopha tsa ho etsa li-roller kapa ho fumana pini.

●Li-roller form units (COMBI) li tsitsitse motheong oa mochini. COMBI e ka nkeloa sebaka ho ea ka boholo bo fapaneng ba t bar.

Pitting spots rolling unit

**Setsi sa li-gear combi roller bakeng sa lihlahisoa 24 * 30 * 3600/1200/600**

Pitting spots rolling unit

Seteishene sa ho etsa Roll 16+ 5 li-roller tse thusang,

Thepa ea rolara ke CR12MOV1(SKD11) Phekolo ea mocheso oa Vacuum 58-62 HRC

Mochini o etsang roll ke sebopeho sa lebokose la gear ho lelefatsa bophelo ba mochini.

The shaft core bophara ke∮40mm, thepa ke 40 CR ka ho tima kalafo ea mocheso.

Lisebelisoa tsa foreimi ea lebota: Q345 - B, ts'ebetso ea CNC, Phekolo ea mocheso

Nomoro ea setulo sa ho otlolla: 1 sete, ts'ebeliso ke ho otlolla boemo ho tloha holimo le tlase, ka pele le ka morao, ka ho le letšehali le ka ho le letona.

Ho etsa lebelo la mohala 0-80M/min. Lebelo le potlakileng kapa le liehang e ka ba taolo ea boiketsetso

Bolelele ba Sehlahisoa: 3600mm/1200/600mm